John,
Wipe as much as you can with a rag. Then find an appropriate solvent:
paraffin might work well. Then finish up with soap and water.
Then take your wheels off, clean the inner surface of the hub where
the spokes 'begin' really well, and apply a clear silicone caulk to
the 'top' of each spoke.
The caulk, if carefully applied to a clean surface, will prevent
grease from exuding along the spokes.
Brian
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|