Or, you can replace it with a new Pertronix Distributor ... $100 + ,
but has the correct advance curve built in. I did, it works great
...
>Hello!
>I am rebuilding a '60 TR3, however I've been told that since I've increased
>the displacement from 1991cc to 2138cc, that I also need to replace the
>distributor with that from a TR4 (with a slightly different advance curve.)
> My question is: Will I also be changing distributor caps and rotor
>button's by changing distributor models?
>
>Thanks, Paul Dorsey 60 TR3
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|