triumphs
[Top] [All Lists]

Re: [TR] [6pack] Using Opened Brake Fluif

To: <TR250Driver@aol.com>, <75TR6@tr6.danielsonfamily.org>,
Subject: Re: [TR] [6pack] Using Opened Brake Fluif
From: "Joe Curry" <spitlist@cox.net>
Date: Fri, 13 Feb 2009 17:13:14 -0700
Darrell,
It is definitely not recommended to shake up DOT 5.  While the bubbles will
rise to the top and dissipate if left to settle, if you drive it right away,
you will force them into the lines and that is not a good thing.

Joe

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of TR250Driver@aol.com
Sent: Friday, February 13, 2009 5:09 PM
To: 75TR6@tr6.danielsonfamily.org; triumphs@autox.team.net;
6pack@autox.team.net
Subject: Re: [TR] [6pack] Using Opened Brake Fluif

In a message dated 2/13/2009 6:54:59 P.M. Eastern Standard Time,  
75TR6@tr6.danielsonfamily.org writes:

Fact or  old wife's tale? 



Not sure about that Bob,
But a related subject on silicone type brake fluif that comes to mind  for
me 
is that I am in the habit of shaking that bottle of fluif just to get it  
mixed up good.  I can't help myself, just seems like a natural thing  to do
as 
soon as the bottle reaches my hand.  Then when I pour that  fluif , I see
these 
tiny little bubbles all over within the fluif,  is  that a bad thing?
Darrell
**************Nothing says I love you like flowers! Find a florist near you 
now.
(http://yellowpages.aol.com/search?query=florist&ncid=emlcntusyelp00000002)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as spitlist@cox.net

http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>