----- "wbeech" <wbeech@flash.net> wrote:>
> The way the machine shop explained it to me, balance them separately
> then
> you don't have to pull the flywheel when you replace a clutch. It
> made
> perfect sense, so that is what I did when we re-built the original
> TR3
> engine for the car last year.
Exactly my take on it. Balancing it all of a piece without having balanced the
flywheel separately would be a mistake, IMHO.
Phil Ethier West Side Saint Paul Minnesota USA
1962 Triumph TR4 CT2846L 1979 Caterham 7
1993 Suburban 1994 Miata C-package 2007 Saturn Ion 3 2.4
pethier [at] comcast [dot] net
http://forum.mnautox.com/forums http://www.flickr.com/photos/pethier
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|