I had a similar problem last year. I took the rocker shaft off and checked
everything I could without removing the head. Found nothing. Then I
started to look around the engine and I found that the fan belt had started
to separate and was hitting metal when I accelerated. Didn't make the noise
without the load. Might want to look around the engine bay.
Pete
----- Original Message -----
From: "Karl Vacek" <kvacek@ameritech.net>
To: "Ed Oot" <eoot@citlink.net>; <triumphs@autox.team.net>
Sent: Tuesday, October 14, 2008 2:09 PM
Subject: Re: [TR] TR3 Tick Tick Tick
> This still doesn't rule out Randall's suggestion that it could be in the
> rear axle ring gear. Can you find a way to eliminate that possibility ?
> If it's there, I'd expect it to happen under engine braking as well as
> acceleration.
>
> Karl
>
>
>> The tick is there in every gear when under load. If just maintaining
>> speed then is not (or is barely) noticeable.
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as pryner@verizon.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|