In a message dated 7/26/2008 1:13:19 P.M. Eastern Daylight Time,
wbeech@flash.net writes:
I was just thinking about those
bolt head too as well as the heater tube that runs along side the engine and
the metal band, dust cover, around the back of the starter. I left them
both natural, unfinished, I hope this is correct.
I would say the tube should be black if you are referring to the one that
goes to the water pump. BTW, Yikes they painted my water pump grease jerk
black! I would be good with the starter as long as the finish on the casing
is
matte black.
The TRA Judging manual is saying that bonnet release was installed prior to
painting so the hardware should be body color. But natural or body color is
accepted on the spring, spring-thimble cup & cable which means they really
have on clue.
Darrell
**************Get fantasy football with free live scoring. Sign up for
FanHouse Fantasy Football today.
(http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|