I got this from Sears. Works great. A one man job to lift or lower.
http://www.sears.com/shc/s/p_10153_12605_00646153000P
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: <maya2blue@juno.com>; <triumphs@autox.team.net>
Sent: Wednesday, June 25, 2008 1:14 AM
Subject: Re: [TR] weight of a finished factory hardtop
>> Many thanks your help, and any suggestions re a hoist system
>> for a '78 spitifer hardtop
>
> No idea what it weighs, but I'm sure it's less than 500 pounds.
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=45076
>
> For my TR3A, I used some flat iron strap (from Home Depot) to bend and
> drill
> 3 'hooks' to go under the door openings on each side, and the center of
> the
> back rail. Linked them together with cotton rope, tied to a single rope
> that goes over a pulley made from a baby buggy wheel and fastened to the
> rafters with more strap iron. Then it's tied off to some nails in the
> side
> wall. Still hanging there 20 years later.
>
> Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as eoot@citlink.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|