List,
I just had a baffling problem: I can't completely tighten one particular bolt
on one of my brake calipers???? /////////////////// Seems like I would have
seen this problem before now, I mean I've had the caliper unit off several
times, and both mounting bolts are new from Moss and are the right ones and
are exactly just alike.
The problem is seen this way: The bolt travels thru the dust shield, the
'alligator-eyes-looking' brake caliper mounting holes and lastly they screw
into the vertical link. New bolts were obtained as length of bolts is
critical. It's almost like it requires some sort of 'distance-piece' to
enable the top bolt to go thru completely.
Has anyone else had this happen?
Thanks, Paul Dorsey 60 TR3
--
I am using the free version of SPAMfighter for private users.
It has removed 690 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|