From: AMfoto1@aol.com
> Hi Bob,
>
> I never found a socket thin enough to fit in there.
>
> So finally I replaced all four bolts with high grade, socket headed bolts and
> my life has been much easier ever since.
>
> The old trick I used before this rather simple solution found it's way into
> my brain was to hold the bolt from turning by wedging a large flat blade
> screwdriver between one of the flats of the bolt head and the wall of the
>shock
> absorber.
Exactly my story with the TR4.
--
Phil Ethier West Side Saint Paul Minnesota USA
1962 Triumph TR4 CT2846L, 1992 Saturn SL2, 1993 Suburban,
1994 Miata C package
pethier [at] comcast [dot] net http://forum.mnautox.com/forums/
http://www.flickr.com/photos/pethier
I decry the textmessagization of the American-English language.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|