triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TR] head gasket and figure of 8 gasket

from [Randall] [Permanent Link][Original]
To: <triumphs@autox.team.net>
Subject: Re: [TR] head gasket and figure of 8 gasket
From: "Randall" <tr3driver@ca.rr.com>
Date: Mon, 9 Jun 2008 18:08:35 -0700 
> For the TR3 4 cylinder motor.
> Is the head gasket different for the 87mm liners, as opposed 
> to the standard 
> 83mm?

Yes, but the 83mm gasket is virtually impossible to find these days.

> Steel or copper for figure of 8 gasket?

Mine have always been copper and worked well.  The steel ones might work,
but I've never tried them.

Randall
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TR] Smoking TR3 after replacing Head Gasket - further, Allan Reich
Next by Date:  Re: [TR] head gasket and figure of 8 gasket, DLylis
Previous by Thread:  [TR] head gasket and figure of 8 gasket, FGFO1
Next by Thread:  Re: [TR] head gasket and figure of 8 gasket, DLylis
Indexes:  [Date] [Thread] [Top] [All Lists]