All lister,
I had the same problem with the joints on my 250. The problem was that
underneath the zerk fitting was a plastic washer. It wasn't strong enough to
stop the grease. Remove the plastic and replace with a stainless fender washer
of the proper size and no more problems. Give it a try.
John Maneke
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|