On Wednesday 04 June 2008 12:28 pm, William C. Quincy wrote:
> Greetings listers,
> Ive just added a electric fuel pump (CB Performance model 3193
> rotary fuel pump)
> It is advertised to pump at 3 = p.s.i. It seems to be pumping to
> much pressure
> for my SUs. After 10 to 20 minutes gas is flowing out of the float
> breather tubes.
> Im guessing a pressure regulator is the fix. So, is there any
> pressure reg. brand or pressure setting recommendation. Or maybe an
> other direction to go.
>
>
> Bill Quincy
> Wichita, Ks.
> TR3A TS69623L
Bill,
I run 2 PSI in both the 3 and 4 with the H6 SUs. Cars have never run smoother
since I canned the mechanical pumps.
I use a regulator with gauge that I got from Jegs but I cant remember the
brand. But it works for what they call "low pressure" fuel systems.
Has 1 intake and 2 outlets. Outlet 1 for the carbs and outlet 2 for the gauge.
Someone on this list recommended the Jegs site and the gauge by model number
about 2 years ago. Might want to check the archives.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|