On Sunday 01 June 2008 08:13 pm, DLylis@aol.com wrote:
> I made my deadline of getting the body tub on the chassis on my 3A. June 1
> was the target and June 1 it is.
> While the body was off I bought K&N air filters and now find that the only
> way they will fit is with the fiber carb spacers removed. What trouble am
> I asking for here.
> Returning the filters is not an option as I have run the motor with the
> body off (and the filters on).
>
>
Hello,
Do you have the std 3 3A intake manifold or the later TR4A version? The 4A
intake is a bit longer than the 3 and 4 intake. If you have the 4A intake,
this could be where your problem is.
I have never run a 3 or a 4 without those spacers. THey are asbestos I think
or something similar and act as a insulator I believe. Keeps direct engine
heat from the carburators.
Anyway, this is what I always thought and may have been wrong all these years.
What does the rest of the list say?
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|