My commission number is CC762xx. There is a chrome bolt for the upper mount
in the wheel arch just below the folded hood frame but I couldn't find a
lower mounting point for the inertia reel.
Tim Buja - Rockford, IL - 80 TR8, 73 Stag, 72 TR6
-----Original Message-----
From: Tony Gordon [mailto:triumph@2simpleusa.com]
I have two 72's and they both have mounting points ... I can measure the
location over the weekend on the parts car in the hope that you can locate
the exact point. I would recommend trying to find the factory point if you
can since it will give you a much better mechanical fixing that a hole
drilled through the wheel arch alone.
What's the commission number of your car? Mine are in the CC 79xxx and
80xxx range.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|