triumphs
[Top] [All Lists]

Re: [TR] Marty Mishap

To: <ghaynestr4@aol.com>, <triumphs@autox.team.net>
Subject: Re: [TR] Marty Mishap
From: tom white <tswhitez123@hotmail.com>
Date: Wed, 28 May 2008 13:18:36 +0000
Back in the 70s I saw a TR3A in an autocross break the wheel studs on the
right rear wheel and roll over.  Fortunately the car had a roll bar and the
driver walked away.

Best regards,
Tom

> From: GHaynesTR4@aol.com
> Date: Mon, 26 May 2008 17:59:59 -0400
> To: triumphs@autox.team.net
> Subject: [TR] Marty Mishap
>
> Marty,
> So sorry that an autocross has taken a car, especially one our ours.   I
> truly hope that you and anyone nearby are OK.   I'm guessing, what with your
> experience, that the course was not set up with safety adequately in mind.
Things
> happen, and many of them can be anticipated by a heads-up course layout.
> Guess you'll have to share all the details with us to put this into
> perspective.   What lessons can we learn?
> Regrets,
> George Haynes
>
>
> **************
> Get trade secrets for amazing burgers. Watch
> "Cooking with Tyler Florence" on AOL Food.
>
> (http://food.aol.com/tyler-florence?video=4&amp;?NCID=aolfod00030000000002)
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123@hotmail.com
>
> http://www.team.net/archive

_________________________________________________________________
Make every e-mail and IM count. Join the im Initiative from Microsoft.
http://im.live.com/Messenger/IM/Join/Default.aspx?source=EML_WL_ MakeCount
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>