My steering box has the Penrite grease, an it slowly weeps through the olive
gland & nut. So I think my problem is that the control head is not engage
properly with the cut out in the stator tube.
I will be checking this out & get back to the list.
Thanks for everyone's suggestions.
Ibsen
----- Original Message -----
From: Randall
Cc: triumphs@autox.team.net
Sent: Tuesday, May 27, 2008 2:44 PM
Subject: Re: [TR] Length of Stator Tube?
> If that were the case the box would not hold lubricant. The
> puddle on the
> floor would give it away.
Not if you use Penrite "Steering box lube" as some vendors recommend. It's
more of a thin grease than an oil.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as flashtr3@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|