> If anyone has measured the vacuum on a smooth idling TR6,
> could you post what your measurement was?
Robert,
I can't answer your question, just wanted to point out that the original
vacuum retard will cause a low vacuum reading. So if you are going to
compare numbers, you need to know what the ignition timing was at the time
(retard working or not).
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|