Terry,
I ordered a pair of those from Revington in the UK.
They looked real nice, the problem was the stem where it goes through
the fender was about 3/4", the spring was attached to the lower part
of of the mirror. (the underside of the fender)
I suppose it needed that much in order to stay firmly in place so the
spring could operate correctly.
I didn't want that large a hole in my fenders so I went with the type
that are somewhat a pain, but the hole is smaller.
By the way they are NOT cheap!!!!!
I finally donated mine to the silent auction at Valley Forge.
On May 18, 2008, at 5:29 PM, terryrs@comcast.net wrote:
>
>
> Didn't someone post here that they had a pair of springloaded ones?
> Where did they come from again? I can't seem to find that listing.
>
> Thanks, all.
>
> Terry '59 TR3A (TS 58667)
>
Jeanne & Tony
allegrorover@mac.com
58 TR3A
TS27093L
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|