Kevin,
Having stripped a thread.....I go by feel. If you replace the threads with
Keen-Serts or Heli-Coils, you can crank them down as much as you want.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of mrv8q@aim.com
Sent: Saturday, May 10, 2008 8:49 PM
To: Triumphs@autox.team.net
Subject: [TR] Trailing arm studs
Hello, what is the list's recommendation on replacing the 6 studs into the
TA assembly?
Finger tight, tighter, any use of Loctite, any other suggestions.....
Thanks!B
Best, Kevin Browne '74 TR6
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as 75tr6@tr6.danielsonfamily.org
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.93 / Virus Database: 269.23.14/1425 - Release Date: 5/9/2008
12:38 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|