> Randal was right.
> Cam is non stock; supposed to be a 270 cam.
>
> I reset the valves to .012 inake & .014 exhaust.
>
> Better, but still skipping.
> I went on the electrical hunt:
> Changed Plugs, still skipping.
> Changed plug wires, nothing yet.
> Changed distributer cap. Some improvement, At least car could go down the
> Street.
> Went about 10 miles, Alternator light started coming on, started skipping
> some more.
> There still doesn't seem to be any spark in # 2 cylinder.
> At least when I unplug # 2 theres no difference.
> If I unplug any of the other spark plugs the idle changes.
>
> Running out of ideas
>
> Al
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|