> Upon removal of the tranny cover,
> amazed was I to
> discover a quarter sized hole on the top of the casing about
> two inches aft
> of the bolt flange!
I had a somewhat similar hole many years ago, after the nut came off the end
of the starter drive and eventually exited through the housing. Didn't seem
important at the time, but it started a crack that eventually separated the
flange from the rest of the bellhousing. Oops.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|