I'm in the process of replacing the front set of differential mount pins and
brackets on my '69 TR6. I have already removed the pins and brackets and
will be welding the new ones on in the morning. I need to know what the d
istance is from the bottom of the bracket to the taper on the threads of the
pin.
Also, what is the distance from the bottom of the diff bridge to the bottom of
the pins?
The ones I took off appear to be 1 3/4". Can that be correct? I'm putting on
poly mount bushings. When I put the two bushings together, they are 1 7/8"
plus the thickness of the washer and the diff yoke bracket. I do not think that
the poly bushing will compress. This measurement is critical. If it is too
small, I will not be able to put the nut on and if it is too great, I will
have free play.
TIA
Peter Schoppelry
PS... Please answer direct as I am in digest mode.
**************Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|