triumphs
[Top] [All Lists]

Re: [TR] TR6 Connecting Rods

To: "Triumph List" <triumphs@autox.team.net>
Subject: Re: [TR] TR6 Connecting Rods
From: "Wayne Lee" <motorcarriage@charter.net>
Date: Thu, 15 Nov 2007 13:35:02 -0500
I screwed up and tried pasting a small image in my last email. Here is a 
link to the auction with the Rods in question.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=110151072097&ssPageName=STRK:MEWN:IT&ih=001


> Hi Listers,
>     Below is a set of used Connecting Rods that are supposedly for a TR6
> that I bought on eBay. Upon seeing another set of Rods from someone who 
> had
> documented their Engine rebuild I noticed theirs were different.
> They had a hole in them centered right above the Big End and a recessed 
> area
> with a constant radius above the hole running up between the Beam area of
> the rods. Can anyone help identify these as being from a TR6? I was
> concerned they might really be for a GT6. In the Manual they show a Rod
> looking like these but the hole isn't visible in the illustration. In a
> Rimmer Bros. Illustration though I did see the rod with the hole in it. I
> have this questioned raised over on the 6-pack website but haven't heard
> back yet except for the guy who had the pictures of his rebuild.
> I bought these to have a set to prep and rework in anticipation of putting
> Rings in my Car next spring when my other Cyl. Head should be ready to go
> on.
> Any feedback greatly appreciated!
> Regards,
> Wayne Lee
> Douglas,MA
> 58 TR4
> 64 TR4
> 75 TR6
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>