>> Then it is easy to remove the pump. One can also remove the
>> pump with the
>> pulley in place but that is (as I recall) involves some
>> wrench work which is
>> a bit tedious.
=========================================================================================================
Jay Holkamp of this list designed a pulley remover for T/R 2-4 and it works
quite well, makes the on the road replacement of a water pump clean and
easy. "FT"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|