> Reattach the hacksaw blade to the handle and make two diametric
> cuts-carefully.
FWIW, I found that making a single cut, only mostly through the old
Silentbloc shell (so no damage to the center link) was enough. Then I was
able to use a punch and hammer to break the shell at the cut, and tap it out
of the center link.
Certainly not the only way, nor necessarily the best, just what worked for
me with the tools I had available at the time.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|