I always spray both sides with a couple of coats of aluminum paint. There
is a $pecial copper spray paint for this but I think the aluminum paint does
the same thing for a few pennies... plus you likely have a can of the stuff
on the shelf.
Geo
----- Original Message -----
From: "john doe" <rccpl1@yahoo.com>
Subject: [TR] cylinder head
> redid the head and now in the process of putting it back together should i
> usse a sealent on the head gasket
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|