triumphs
[Top] [All Lists]

Re: [TR] Pristine TR-4 hood availabe.

To: <triumphs@autox.team.net>
Subject: Re: [TR] Pristine TR-4 hood availabe.
From: "Ian" <Lbc.Resto@comcast.net>
Date: Mon, 5 Nov 2007 12:01:46 -0500
I have both; a long bubble on the car as well as a short bubble (finishes
about 6 inches from the back) that is probably going onto eBay soon, unless
there is some interest amongst the true enthusiasts.

--
Ian
62 TR4

-----Original Message-----
From: triumphs-bounces+lbc.resto=comcast.net@autox.team.net
[mailto:triumphs-bounces+lbc.resto=comcast.net@autox.team.net] On Behalf Of
pethier@comcast.net
Sent: Monday, November 05, 2007 11:57 AM
To: jar@aldermanroad.net; triumphs@autox.team.net
Cc: jar7u@hscmail.mcc.virginia.edu
Subject: Re: [TR] Pristine TR-4 hood availabe.

> I was going through some of my assortmented parts, and find that I have 
> a pristine TR-4 hood.  I'm not sure if it came off a -4 or 4A. Also, 
> there were the "short" carb bulge hoods, and the "long" bulge hoods.  
> Does anyone out there know the measurements for each?

No measurements should be needed, as the difference is quite obvious.  
On the long-bubble hood (bonnet), the bubble reaches all the way to the aft
end of the hood.  
In the more-rare early short-bubble hood, the bubble falls far short of the
rear of the hood.

I think all the TR4, TR4A, TR5, TR250 long-bubble hoods are the same, but
I'm no expert.
This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>