Hello, listers, what are you using to replace the Brass Adaptor on the
TR6 intake manifold?
Plate BH of #1 Spare parts catalog, BH29, #UKC2313... This is the
adaptor from the EGR pipe,
into the manifold; Coarse thread on the manifold side, fine thread on
the pipe side...
Not available from the usual suspects.
Also, concerning the manifold itself, is there a common cure for the
deteriorating water pipe
thru the manifold? Two machine shops I took it to shook their heads;
one suggested clamping
a copper pipe underneath.... don't know if that will foul the linkage.
Any and all suggestions welcome!
Best, Kevin Browne
________________________________________________________________________
Check Out the new free AIM(R) Mail -- Unlimited storage and
industry-leading spam and email virus protection.
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|