I used an external oiler (home made) on my TR3 after I discovered the rear
cam bearing was in upside down blocking all oil flow to the head, I didn't want
to pull the engine again.
It used lots of oil!
Mike Moore
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|