triumphs
[Top] [All Lists]

Re: [TR] Stromberg bypass valves

To: "'John Mitchell'" <jmitch@snet.net>, "'6-Pack'"
Subject: Re: [TR] Stromberg bypass valves
From: "Scott Suhring" <suhringtr36@comcast.net>
Date: Sun, 12 Aug 2007 21:21:14 -0400
Yes.  If the diaphragm is torn, you will not be able to get the idle below
1800 to 2000 RPMs.

Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 R3

-----Original Message-----
From: triumphs-bounces+suhringtr36=comcast.net@autox.team.net
[mailto:triumphs-bounces+suhringtr36=comcast.net@autox.team.net] On Behalf
Of John Mitchell
Sent: Sunday, August 12, 2007 9:28 AM
To: 6-Pack; triumphs@autox.team.net
Subject: [TR] Stromberg bypass valves

    On Stromberg Carburetors, do the bypass valves have any effect on 
idle quality .  Thanks   John Mitchell  76 TR6
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>