[TR] chamfer confusion?

["Paul Dorsey" <dorpaul@negia.net>]

List,
On my 60 TR3A, between my SU's and the intake manifold are three gaskets
(under each H6): between the two thin ones is a 3/8" thick gasket.  Only one
one side of that gasket is a small chamfer (rut) cut on the 1 3/4" main hole.
Does the chamfer face the carb or the intake?  why?  or does it matter?

Thanks,
Paul
60 TR3


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org