On 21 Oct 2006 at 12:41, TR6UO@aol.com wrote:
> What's so confusing is the use of the term "Final
> Ratio" to mean the rear axle alone.
Speaking of terminology w.r.t. the diff, when people speak of a
"higher diff", is the convention that this means the gearing is
higher or that the numerical ratio is higher resulting in lower
gearing? (I would expect that a "higher rear end" means that it
isn't dragging, which is a totally different question. :-)
Tanks,
--
Jim Muller
jimmuller@rcn.com
'80 Spitfire, '70 GT6+
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|