In a message dated 7/3/2006 5:50:56 PM Central Standard Time,
triumphtr2@hughes.net writes:
> I'm in the process of replacing the springs, shocks, bushings and
> repainting the 3A suspension, and have all of the driver's side off with
> the exception of the front lower wishbone arm - It won't clear the drop
> arm/rocker shaft. I removed the drop arm nut, but still too small a gap
> to wiggle the end of the wishbone arm through (maybe with some force,
> but I'm concerned about damaging the threads on the fulcrum pin and/or
> the rocker shaft). The need to remove the steering isn't mentioned the
> service manual. Is there another way to do this? If not, how much more
> of the steering has to be removed?
>
I seem to recall taking the three bolts securing the steering box out and
moving the box up part of an inch to clear. No real problem otherwise.
Dave
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|