> I am in the process of removing one of the rear wings on my TR4,
> and have not really found the right wrench or socket to get to
> the two upper, most rearward bolts, one being above the tail
> light. I have tried a 1/4" socket on a universal, but it is
> really hard to get any bite in the bolt. Any suggestions from
> those already indoctrinated?
I've not done a TR4, but a GearWrench works really well on a TR3A.
http://www.gearwrench.com/
The stubby combination ones work best for me.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|