triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TR] Snapped Off Head of Heater Hose Clamp

from [Bill McLeod] [Permanent Link][Original]
To: Marty Clark <marty.tr6@gmail.com>, triumphs@autox.team.net
Subject: Re: [TR] Snapped Off Head of Heater Hose Clamp
From: Bill McLeod <wbmcleod@cox.net>
Date: Sun, 07 May 2006 14:18:08 -0700 
A pair of dykes (wire cutters, not the other) or a dremel cut-off wheel.
Regards, Bill
Slightly Classics
Tucson

Marty Clark wrote:
> While replacing the 4 heater hoses today I twisted off the head of the screw
> on a old hose clamp. ....Any suggestions on how to remove it?
>
> --
> Marty Clark
> Gilbert, AZ
> 1974 TR6 CF17352U
> http://www.triumphowners.com/798


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TR] Snapped Off Head of Heater Hose Clamp, Phil Bacon
Next by Date:  [TR] Brake pedal spring?, Steinman, Bill
Previous by Thread:  Re: [TR] Snapped Off Head of Heater Hose Clamp, Phil Bacon
Next by Thread:  Re: [TR] Snapped Off Head of Heater Hose Clamp, Marty Clark
Indexes:  [Date] [Thread] [Top] [All Lists]