Im installing Richard Goods adjustable camber brackets and the bolts
supplied are about 1/4" too short. Both sides have same the same number
of shims, 4 on the inside and 3 on the outside. Can I take out 3 shims
off from the inside and outside bracket without changing the Toe-in
geometry, or should I just go look for new bolts. I don't really want
to re-use the old bolts as there's some corrosion present. Thanks for
any advice. John Mitchell 76 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|