John Gillis wrote:
> Two questions for the "combined wisdom", can I fit a TR4 cooling fan to
> my TR2, i.e the one with 4 blades and square ends. My original is a bit
> bashed with the aluminium fins chipped and a little distorted. I see a
> TR4 fan on E-Bay and the price of a new replacement from Moss is over
> 100euro. Or if anyone out there has a nice straight one they would like
> to sell?. Secondly my housing for the water pump spindle (the casting
> that bolts to the block) is very flaky on the inside due to corrosion. I
> am also trying to locate a half decent one of these, the item from the
> TR250/6 looks similar, is it?, again one on E-Bay and again if anyone
> has one lying around???.
> Regards
> John
John,
I have a tr4 fan on my 3a. works fine. I dont have a spare of either
type. I installed the 4 type fan because my 3 type was in bad shape, it
hit the rad with the previous owner!
Bob Labuz
1958 TR3A
1974 T140V
1998 T-Bird T-3
|