To: | "INTERNET:IkeLevine@aol.com" <IkeLevine@aol.com> |
---|---|
Subject: | Heater Control Valve |
From: | Dave Massey <105671.471@compuserve.com> |
Date: | Thu, 20 May 2004 08:34:41 -0400 |
Cc: | triumphs@autox.team.net i4KCbN8K029965 |
Message text written by INTERNET:IkeLevine@aol.com >I need to change out the heater control valve and my question is ........ Do I need to drain the coolant out of the system? < What car? With the TR series (TR2-6) you don't have to drain but you may loose a few drops when you take it off. But since it is located very high on the system, draining is not necessary. The same is probably true for the Spitfire/GT6 cars but I am less familiar with them. We don't want to talk about the TR7/8 heater valves. Dave |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Finding carb vacuum leaks with propane torch, Dave Massey |
---|---|
Next by Date: | Re: GT6+ Rear Lower Suspension Arm, Barry Schwartz |
Previous by Thread: | Heater Control Valve, IkeLevine |
Next by Thread: | RE: Heater Control Valve, Randall Young |
Indexes: | [Date] [Thread] [Top] [All Lists] |