Clutch pedal wear

[John Mitchell <jmitch@snet.net>]

     Ive got the transmission in and the hydraulics bled.  I noticed the 
clutch pedal moves a half to 3/4 inch before the shaft on the master 
cylinder starts to move in.  I was wondering if this is normal or is the 
pedal itself warn.  The Clutch master cylinder and clevis pin are tight, 
but there is slop in the hole in the pedal.  If this is not normal, how 
can I fix the problem.  Right now the clutch engages about an inch off 
the floor and Id like to get a little more pedal if possible.

                                                       Thanks again for 
all you help.      John Mitchell    TR6  1976