Dave, thank you very much. I guess one other question I have....if bleeding it
the classic way with 2 people, do I need to bleed at the lines where they meet
the master cylinders before moving on to each calliper and wheel cylinder?
And, once moving on to the wheels, is it still the preferred procedure to start
at the wheel furthest from the master cylinder and work towards it??
Jim
> Jim, the basic theory behind bleading is to pump fluid from the master
> sylinder to the slave/wheel cylinders and out the bleeders sweeping the air
> with it. There are several ways to do that.
>
> The classic way .....
> Good luck
>
> Dave
|