triumphs
[Top] [All Lists]

Re: i can't believe i did this but...

To: "Carl McIver" <cmciver@mindspring.com>
Subject: Re: i can't believe i did this but...
From: <lstein6@earthlink.net>
Date: Sat, 9 Aug 2003 15:59:37 -0600
Cc: "Triumphs@Autox. Team. Net" <triumphs@autox.team.net>, <tr8@mercury.lcs.mit.edu>
References: <00af01c35eab$93943c90$0200a8c0@newlaptop> <002101c35ec0$616d7140$0100a8c0@one>
thanks carl,
   i found the paper that i wrote the wiring on when i looked harder.  i did
write two different pics/diagrams on two different pieces of paper.  it's
working great now !
again thanks,
larry

----- Original Message -----
From: "Carl McIver" <cmciver@mindspring.com>
To: <lstein6@earthlink.net>
Sent: Saturday, August 09, 2003 3:51 PM
Subject: Re: i can't believe i did this but...


>     Okay, digging out my ROM for reference, here we go:
>     Yellow wire is the surge lead and goes to the brush block, which also
should have a wire from the rectifier, a single small
> wire.
>     The red wire is the sense wire.  Goes directly to a separate terminal
on the rectifier.
>
>     I think, that for the most part, the wiring pretty much goes one way.
If it doesn't seem to fit right, then it probably isn't
> correct.  I've never had to pay attention when I rebuild alternators,
things just kinda make sense to me.  That's just me, though,
> your idea of sense obviously varies!
>
> ----- Original Message -----
> From: <lstein6@earthlink.net>
> To: "Triumphs@Autox. Team. Net" <triumphs@autox.team.net>;
<tr8@mercury.lcs.mit.edu>
> Sent: Saturday, August 09, 2003 12:22 PM
> Subject: i can't believe i did this but...
>
>
> | on my 80 tr7, i am rebuilding the alternator.  putting in a new voltage
> | regulator and a bridge rectifier.  now i can't seem to read my own
notes.
> | there is a metal band on the top of the brush box.  one yellow wire goes
> | from i think a diode to the left end of it.  thats fine.  there is a red
> | wire coming from the bridge rectifier on the right side and also a
yellow
> | wire coming from the voltage regulator.  does the yellow wire coming
from
> | the voltage regulator connect to the red wire coming from the bridge
> | rectifier ?  and do both those wires go to the metal band that is one of
the
> | brushes ?  or do they or one of them just mount to the brush box down on
the
> | right of the box ?  i can't believe i did this, but now i do not know
where
> | those wires go !
> | thanks for any assistance anyone can shed, larry
> |
> |
> | --
> | Forwarded via the TR7/8 mailing list. Please send administrative
requests
> | to the majordomo at tr8-request@mercury.lcs.mit.edu

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>