Hi Graham,
I installed a Toyota Celica 5 speed in Casper (57 TR3), and
used Herman VanDenAkkers conversion kit, he has one for the TR6.
You can contact Herman at:
661-242-1253 or handhvan@msn.com
Herman is located in Southern California. I am completely, totally
satisfied with his kit, the machining is perfect, it fits, works and
Herman supplies all the stuff need (except the transmission) for the
conversion.
I am pretty sure Herman will be at Triumphest in Riverside
with his Vendor display if you want to see what he has.
Good Luck
>Hi folks
>Someone has asked me about fitting a five speed box to a TR6. I remember a
>while back that there was a thread about this very subject, but not owning a
>TR6 or being of the inclination to dismiss a six (or seven if you add the
>extra switch) speed box which requires no specialist bits to fit, I didn't
>take much notice of nor save the thread!
>
>Anyone out there have the info to help with this enquiry?
>
>TIA Graham.
>
--
Bill Pugh
1957 TR3
aka
Casper
Wallace, CA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|