triumphs
[Top] [All Lists]

Re: DIY brake/clutch pressuer bleeder -- from shop-talk

To: Chuck Renner <crenner@dynalivery.com>
Subject: Re: DIY brake/clutch pressuer bleeder -- from shop-talk
From: Don Malling <dmallin@attglobal.net>
Date: Tue, 01 Jul 2003 04:49:34 -0400
Cc: 6-Pack <6pack@autox.team.net>, triumphs@autox.team.net, mgs@autox.team.net
References: <3F00D164.2080109@attglobal.net> <006001c33f88$80e3c9e0$6402a8c0@TPA20>
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.0.1) Gecko/20020823 Netscape/7.0
I didn't include all the conversation from shop-talk. One suggestion was 
to use a tire valve stem to make the connections in the center of the MC 
cap (cover the air vent) and the garden sprayer. Then remove the valve 
stems.

Just a thought -- you may still be correct. I bought a Mity-Vac but 
these guys say the fittings leak, and pressure works better than 
suction. Based on your comments, I'll be sure to try my Mity-Vac before 
I build this.

More thoughts/experiences?

Don


Chuck Renner wrote:
>>Saw this over on shop-talk. Thought it might be of interest.
>>
>>http://www.apexcone.com/Bleeder/bleeder.html
>>
> 
> 
> I built one of these.  Didn't work all that well, mainly because I was
> trying to glue in the hose to the cap.  Using an actual fitting would
> probably work better.  But given the relatively low price of products like
> the Mity-Vac, I think they're probably a better way to go, unless you're
> really into building your own tools.

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>