Front mounting plate gasket

[Mitchel Seff <ms6453@optonline.net>]

Hi all,
Installing the front cover plate on a 75 TR6 engine & noticed the gasket 
set came with 2 front plate gaskets. The one that fits best has a 
perfectly round hole for the crank, the other appears slightly different 
because of an "eye" shaped cut out for the crank.
Am I missing something. I know early & late cranks are not the same but 
the engine plate and crank position should be.

-- 
Mitch Seff
Oceanside, N.Y.
75 TR6
http://www.angelfire.com/ny4/triumph5/ 

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive