Doesn't this just mean that you have to tape inside the zones to be painted
so that you can spray on the mask and then tear off the tape for spraying on
the paint, then somehow remove the mask? Doesn't seem like much of a savings
in time or money. Sounds kind of messy and wouldn't cover the question of
overspray sticking to parts in the voids near to objects being painted
unless you sprayed an awful lot of the mask around. Anyway, just asking for
details.
Mark
-----Original Message-----
From: Fred Thomas [mailto:vafred@erols.com]
Sent: Thursday, March 13, 2003 8:17 AM
To: Scott Tilton; triumphs@autox.team.net
Subject: Re: paint masking product query
> Hi everyone,
>
> I'm looking for some stuff that you spray on a surface that acts as a
> substitute for masking tape and paper for spray painting.
>
> The spray on mask material would obviously need to be easily removable
> though.
>
> Any ideas?
>
> Scott Tilton
========================================================================
Any automotive paint store sells this as "masking compound", in your
location "Matto's Auto Paint & Supply", also most "Sherwin-Willimas" paint
stores will carry it "FT"
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|