OK... Rimmer's catalog show both the Spit and
the GT6 as having these little rings around the inner
wheel bearings on the front suspension. They mount on
the uprights to keep water away from the bearings
and felt seals. Both catalogs list the same part number
for both vehicles. My Spit has them, and they simply press
fit on the upright. But on the GT6..what do they press fit
onto/in to? Mine have at least 1/32" free space all the
way around and nothing is tight..or even close.
Am I missing something here?
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|