I am replacing the bolts that connect the body to the frame (or at least
the ones visible in the floor pan), but don't know the difference
between two options, so I turn to the list once again. On McMaster.com,
they list these grade 8 bolts in either:
<http://www.mcmaster.com/param/asp/psearch.asp?FAM=cap&FT_110=48195&FT_1
04=4054&FT_182=47457&FT_255=5585&FT_147=48331&session=desc=Cap%20Screws%
20and%20Bolts;cap;110=48195;104=4054;182=47457;255=5585;147=48331>
<http://www.mcmaster.com/param/asp/psearch.asp?FAM=cap&FT_110=48195&FT_1
04=4054&FT_182=47457&FT_255=5585&FT_147=48331&session=desc=Cap%20Screws%
20and%20Bolts;cap;110=48195;104=4054;182=47457;255=5585;147=48331> Grade
8 Zinc and Yellow Chromate-Plated Alloy Steel
Or
<http://www.mcmaster.com/param/asp/psearch.asp?FAM=cap&FT_110=48195&FT_1
04=4054&FT_182=47457&FT_255=5585&FT_147=48313&session=desc=Cap%20Screws%
20and%20Bolts;cap;110=48195;104=4054;182=47457;255=5585;147=48313>
<http://www.mcmaster.com/param/asp/psearch.asp?FAM=cap&FT_110=48195&FT_1
04=4054&FT_182=47457&FT_255=5585&FT_147=48313&session=desc=Cap%20Screws%
20and%20Bolts;cap;110=48195;104=4054;182=47457;255=5585;147=48313> Grade
8 Ultra Coated Alloy Steel
So I was wondering which to get.
Thanks,
R. Ashford Little II
www.geocities.com/ralittle2
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|