Bill,
There is a rubber seal along the bottom of the door and the top edge just
under where the windshield attaches to the body. I am about to install the
fuzzy seals as well and wonder how:
1/ They are attached to the inner door jambs and simply "rest" against the
gap?
2/ If this is the case wouldn't the edge of the door panel still be prone
to water?
3/ There is no seal that is "crushed" between the door and the jamb along
the hinge edge and the latch edge?
4/ If the fuzzy seals contain the water and they are on the inside of the
car where does the water drain to? Inside the car?
Common questions?
David A. Templeton
'59 TR3a - 9TS54226L ( "9" denotes the CDN import on year of mfr )
'74 Spitfire - FM10491U
Homepage
http://www.trandmustang.homestead.com
TR3a homepage
http://www.trandmustang.homestead.com/tr3ainfo.html
Located in Guelph, Ontario, Canada
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|