oil pressure valve:
> Verbal instructions from Fred were to loosen the hex nut on the o/p valve,
> turn the screw out while counting the turns. If you had it all the way
down
> and had low OP you won't need to keep the setting.The next step was to use
a
> telescoping magnet to fish out the ball and other metal debris if any.
Best
> to not keep the spring compressed too much initially and adjust from
there.
> Soak the spring and ball in spirits for 20 minutes. Replace and push ball
> down with a long stick, you can reverse the magnet, and if you had any
debris
> come up your OP should be higher already.
Pardon my ignorance, but where is the exact location of this valve, and how
will I recognize it?
Phil Ethier West Side Saint Paul Minnesota USA
1970 Lotus Europa, 1992 Saturn SL2, 1986 Suburban, 1962 TR4 CT2846L
pethier@isd.net http://www.mnautox.com/ http://www.vtr2002.org
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|