Re: Wire Wheel Adapters, 9mm spacers

[Gbouff1@aol.com]

Adrian,

I made up some 9mm thick spacers for my wheels and found that this was too 
thick.  The nut was almost flush with the end of the stud which doesn't have 
threads on the last .60-.80".  I reduced the thickness to .250" (about 6.3mm) 
and about 1-11/2 threads extend beyond the nut with no interference problems 
withthe wire wheel.

Gary Bouffard  59 TR3A TS58399

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool